Simmons was a pioneering British manufacturer of electronic drums that supplied electronic kits from 1980 to 1994. The drums' distinctive, electronic sound can be found on countless albums from the 1980s.
The SDS5 as shown on the right was developed in conjunction with Richard James Burgess of Landscape and the first recordings of the instrument were made by Burgess: From the Tea-rooms of Mars ...., Chant No,1 by Spandau Ballet, and Angel Face by Shock. After Burgess and Spandau Ballet appeared on Top of the Pops with the instrument many other musicians began to use the new technology, such as Howard Jones, Jez Strode of Kajagoogoo, John Keeble of Spandau Ballet, Darren Costin of Wang Chung, Rick Allen of Def Leppard, Thomas Dolby, Phil Collins, Neil Peart, and Bill Bruford and the album The Party's Over of Talk Talk Other notable acts employing the Simmons sound include Cameo, Jonzun Crew and Depeche Mode.
Contents |
Single-pad analogue drum synthesizers, including the Pollard Syndrum and the Synare, were introduced in the 1970s, but their unrealistic sound made them generally more suitable for use as a percussion effect than as a replacement for traditional drums. They became a popular element in disco records, especially after the release of music from Star Wars, and can be heard on songs by The Jacksons and Rose Royce.
Around 1978 while working for the company Musicaid in St. Albans, Dave Simmons developed a device with similar capabilities to the Syndrum and Synare, which he called the SDS3. The SDS3 featured four drum channels and a noise generator; the SDS4 was a functionally similar two channel version. At this juncture the drum pads were round, with wooden frames and real 8-inch drum heads. Musicaid was also the distributor for the Lyricon wind synthesizer as played by John L. Walters of Landscape. Walters introduced Richard James Burgess to Simmons and Burgess began using the SDS3s and SDS4s live, onstage, with his band Landscape. Recognizing the potential for a fully electronic drum set that could replace the traditional acoustic set rather than supplement it Burgess began collaborating with Dave Simmons. They mocked up the sounds and flowchart using an ARP 2600 synthesizer. Since Burgess was using the instrument in a live setting they developed the four customizable preset buttons. The distinctive hexagonal shape came about after triangles and bat-wing mock ups had been tried. Rusty Egan drummer and DJ with VISAGE was a close friend of Richard and often went to see Landscape play ... Richard introduced Rusty to the prototype and rusty em composed it in his work with Bill Nelson produced SKIDS 2nd Album Days in Europa recorded at Rockfield Studios in Wales. The Single featuring the mixed electronic and real drums sounds Working for the Yankee Dollar was a shape of things to come in electronic percussion. Rusty played it on the UK tour and took it to Martin Rushant's Genetic Studios for the recording of Visage début single TAR B/W Frequency 7 . Burgess was driving up to St. Albans to work with Simmons on the prototype when it struck him that a honeycomb shape would fit together ergonomically and be simple yet distinctive in appearance. A limited edition of what Simmons referred to as the Mount Rushmore Head sets were also built. Burgess has two of these sets. The basic descending tom-tom sound was modeled after the way Burgess tuned his Pearl single headed concert tom kit on which he would loosen one tension rod causing a wrinkle in the head and creating a descending pitch after the tom was hit.
Burgess had recorded extensively with the prototype of the SDS5 on the Landscape album, with Shock and Spandau Ballet before the SDS-V (5), was introduced commercially in 1981. The world's first fully electronic drum set, the SDS-V featured the famous hexagonal pads and distinctive "dzzshhh" sound heard in countless songs by 80s bands, including Duran Duran and Rush. The standard configuration consisted of an expandable rack-mountable "brain," containing the various drum sounds, and pad modules for bass drum, snare, and three toms. Two spare slots were available so that cymbal or extra tom modules could be added; many drummers, however, chose to use acoustic cymbals rather than the Simmons sounds, which were often compared to that of a trash can lid. Connections to the unit were by XLR plugs, and it could be interfaced with a drum sequencer. Its sturdiness and high sound quality have helped to keep the SDS-V a sought-after device even today.
The SDS-V's biggest disadvantage was the solid polycarbonate heads on the pads. Simmons chose this material for its durability, but the heads' lack of "give" often resulted in wrist pain for users. Soon after, Simmons began shipping pads with soft rubber surfaces. The SDS-V became an instant hit, with Simmons endorsing several drummers, and the distinctive pad shape becoming an icon of the 1980s.
In the USA, Simmons rapid success was due largely to the work of UK session drummer, Glyn Thomas. With the agreement of Dave Simmons, Group Centre Inc. became the sole distributors of all Simmons Electronics products in the USA. After visiting and demoing the SDS5 to music stores in New York, Washington, Los Angeles and Chicago, he secured orders from them all. Manufacturing was ramped up quickly in time for the NAMM Music Expo in Chicago and after staging a series of demos featuring Bill Bruford, dozens more music store owners from all over the country signed up to this electronic revolution, and that expansion quickly established the Simmons name in the rest of the USA.
During the lifetime of the SDS-V, Simmons also produced a compact trigger unit, about the size of a briefcase, containing seven small pads. Used in conjunction with the SDS-V brain, this allowed players to add Simmons sounds to an existing acoustic kit without incorporating a set of full-size pads. This unit was used extensively by New Order at the time.
Also available at the same time was the SDS-6 drum sequencer, used to great effect by artists such as Howard Jones.
Following the success of the SDS-V, Simmons expanded their range in 1983, replacing the V with another modular rack-based brain called the SDS-7, which featured digital sounds on EPROM for the first time, expandable up to twelve modules, and redesigned pads, featuring a skin of rubber to make playing a little easier. The unit used 8-bit samples and a programmable memory, but was prone to malfunctioning and loss of memory, making it unpopular in a live context.
They also produced the cheaper analogue-only SDS-8, which featured a single, non-expandable desktop-style brain. The SDS-8 kit was supplied with four tom pads and a bass pad, using similar hardware to the earlier SDS-V, but in a more budget style, such as using jack leads instead of XLR connectors. The sounds were similar to the SDS-V, but, to the discerning ear, not up to the same quality.
Also available at the time were a number of smaller devices, such as an EPROM "blower" to write samples onto the chips, a "Digital ClapTrap" unit, which, as its name suggested, was a digital clap sound device, a sound very popular in 1980s music.
Simmons began to expand their product line with smaller kits and pads, including the SDS-1, which was a single pad with a built-in EPROM reader for playing a single drum sound sample, and the SDS-200 (2 tom system), SDS-400 (4 tom system), and SDS-800 (bass, snare, and 2 tom system). These products were aimed at acoustic drummers who wanted to add a couple of Simmons pads to their kit on a budget. Some of these products also featured the "run generator", which allowed drummers to play a descending drum roll with a single pad hit.
Following customer feedback, Simmons produced a new series of drum pads in 1985, using "floating" drum heads and changeable shells. The snare drum had an extra trigger for the rim. Again, this improved the playability of the kit. The new brain was called the SDS-9, and was, in effect a non-expandable version of the SDS-7, using that unit's EPROM features, but only on three channels. This kit was yet another well received product for Simmons, as it combined realistic sounds in an inexpensive, compact brain.
Another brain was introduced in 1986 called the SDS-1000, and was, in effect, the same sounds as the SDS-9 (without the ability to change the EPROMS) in a slim 1U, MIDI-enabled, rack mountable unit. The snare sounds, however, were more realistic and clear than the SDS-9. The SDS-1000 also included a "second skin" feature, which emulated the sound of dual-headed drums.
In 1987, after the SDS-9, Simmons decided to enter into the high-end professional market, and created the revolutionary but unsuccessful SDX. It introduced new features that were unheard of in other electronic drums, such as zone intelligence and pad layering. Some of these ideas were not revisited until nearly 15 years after the SDX. Zone Intelligence allowed for up to three samples to be assigned to different locations on a pad for a more realistic sound. With pad layering, different sounds could be triggered via different strike velocities. The SDX was the first Simmons kit since the SDS-7 to support cymbal sounds, with pads called "Symbals" which simulated the swaying motion of real cymbals with a swivel rod. The SDX also included a built-in sampler with a floppy disk drive as its method of storage. The SDX also introduced a new way of modifying sounds. Rather than knobs and switches, it featured a 9" monochrome screen with a GUI controlled by a trackball, similar to the early Mac OS. SDX OS allowed users to fully modify sounds with an easy-to-use interface. Sales of the SDX were limited due to its high price, costing around $10,154. The factory sounds included with the SDX did not match the quality expected for a system of such advanced technology, so many drummers chose to sample their own sounds. A bit more than 300 kits were made, of which fewer remain.
By the time of the launch of the SDX, the company had seen a dramatic fall in their sales as drummers abandoned electronics to return to their acoustic kits. Additionally, due to expensive R&D and manufacturing costs of the SDX, Simmons was losing money. Their final kit was released in 1990, called the SDS-2000, featuring sounds from the SDX library, digital effects, further refined pads, and a new last-ditch company logo. Along with the SDS-2000, Simmons manufactured pads with real drumheads called "Hexaheads", along with "Minihexes", smaller-sized pads sometimes used as cymbal pads. This system failed to catch on, as competitors such as Roland and Yamaha were creating less expensive kits with better sounds. The music scene of the early '90s was different from the late '80s, and the Simmons' sounds, often associated with pop, synth-driven tunes, couldn't find a serious market response in the simplified, more acoustic drumming trends of the grunge and rock styles of the time. During the 90's, Simmons shifted their focus from drum synthesis to drum triggering and MIDI control, with products like the ADT and Trixter (triggered electronic drums from acoustic drum mics), Drum Huggers (small clip-on acoustic drum triggers/pads), and the Silicon Mallet (a xylophone-style MIDI controller). One of Simmons' last products, the Turtle Trap, was a MIDI controller made from the shell of a bass drum pad with the pads being the surfaces of Minihexes (most likely an attempt to sell off excess inventory). However, all of these products were considered failures, and Simmons was quickly losing momentum. In 1999, the company officially closed.
In 2005, Guitar Center acquired the rights to the Simmons trademark and began marketing low-end & cheap chinese electronic drums (commercialised under other names in the world) under the Simmons name and original logo. These kits have no relationship to the original company. However, some of the kits' designs feature traces of the familiar hexagon shape, weird very close models names, along with built-in samples of the classic Simmons sounds. A Trial is currently going on, opposing Dave Simmons the original creator to Guitar Center, the "buyer" of U.S. rights.
Bibliography